New Thread Checker / Thread Gauge for Heavy Hex Sizes

New Thread Checker / Thread Gauge for Heavy Hex Sizes

Soon, I will have a new thread gauge to go with the HexSIzer® Heavy Hex Gauge. For me, I never could tell a 4" thread from a 4-1/2" thread but I can likely tell a a 6-1/8" (uses 4 tpi) nut from a 3-1/3" (uses 4-1/2" tpi) nut at a glance. Most of what I have worked on are studs that were cut from threaded rod so they are 8 threads per inch. Anyway, the thread gauge is really handy if you are working with stud tensioners where you really do have to get the correct pitch on the puller that you will use for the job.

Leave a comment

Please note, comments need to be approved before they are published.