Description
Stick a wrench size chart right on the toolbox. Hold the nut in the "V" and read the wrench or socket size off the magnet. One Imperial, one Metric.
These are the WrenchSizer scale printed on magnets, 4" wide by 3" high. Put them on the side of the toolbox or the bench, and anyone in the shop can size a nut without hunting for a gauge.
How to use it
Nest the loose nut in the "V" so its corners touch both sides. Read the size where the corners land. If it falls between two lines, it's the larger size.
What you get
- One Imperial magnet, inch sizes
- One Metric magnet, mm sizes
Each magnet is labeled IMPERIAL or METRIC, so nobody grabs the wrong one.
Want a smaller set? See the small 3-1/2" x 2" magnets. Want a gauge for your pocket too? See the Stainless WrenchSizer.
Who uses them
Technicians, DIYers and shophands working on cars, mowers, engines and bicycles in the garage, the shop or the driveway.
